Pickup currently not available
Turin DC63 63mm Conical Single-Dose Coffee Grinder - Red Titanium Burrs (Espresso/Turkish Grinds)
✅ 30-Day Satisfaction Guarantee — Arrived damaged, wrong, or defective? We'll replace it or refund you, no hassle.
The Turin DC63 is a single-dose coffee grinder with 63mm Red Titanium-coated conical burrs, stepless grind adjustment, and automatic stop. It is designed for espresso, with an adjustment range that also covers filter brewing and the very fine settings used for Turkish coffee.
I would put this on your shortlist if you enjoy espresso with body and texture, switch beans regularly, and want a grinder that does not take over the counter. The DC63 combines a narrow aluminum body with practical grounds-clearing features, so the appeal is not just the burr size. It is how those features fit into making coffee every day.
Who I would recommend it for
The DC63 makes particular sense for traditional espresso, medium-to-dark roasts, and milk drinks. Its conical burr design generally favors a rounder, more blended flavor presentation rather than emphasizing each flavor separately. If you like the weight of an espresso or want coffee that holds its own in milk, that is a useful direction to consider.
That does not mean conical burrs guarantee sweetness or that flat burrs cannot produce body. Coffee, roast, water, grind setting, and recipe all shape the result. I would choose this grinder because its workflow and likely cup profile suit you, not because 63mm automatically means better coffee.
What single dosing actually means
Single dosing means weighing the beans for one brew rather than keeping a hopper full. You grind that measured amount, then start fresh for the next drink. I like this approach when alternating between a daily espresso and another coffee without committing to a full hopper of either.
The hopper holds approximately 40g with the bellows installed. An anti-popcorn disc helps control beans bouncing around the feed area. You can use a bellows-free routine or use the bellows for an additional purge, depending on how much clearing your coffee needs.
Stepless adjustment for dialing in espresso
The large adjustment dial moves without fixed clicks. That matters for espresso because the right setting can fall between two positions on a stepped grinder. Small changes let you fine-tune flow while keeping your dose and beverage yield consistent.
If a shot runs too quickly, try a slightly finer setting. If it barely flows, try coarser. I would change one variable at a time, taste the result, and record the setting once it is working. Follow the manual when adjusting finer, especially if beans or grounds remain in the burrs.
For filter coffee, move to a coarser setting and record your espresso position before switching. The published range also covers Turkish coffee, though the result depends on calibration, the beans, and how fine your recipe requires.
Less static and a more deliberate clearing routine
An anti-static ionizer in the exit chute helps reduce loose grounds and coffee clinging to surrounding surfaces. The magnetic chute detaches for cleaning, and its knocker helps dislodge fine grounds. Automatic stop detects when the beans have finished, then allows a short run-on to help clear the chamber.
These features work toward low retention, meaning less coffee left inside after grinding. The published figure is under 0.1g under suitable conditions, not a guarantee for every dose. Beans, grind size, seasoning, static, cleaning, and your use of the knocker and bellows all affect the result.
I would weigh both beans and grounds while learning the grinder. Similar input and output weights are useful, but do not prove that no older grounds remain inside. When changing coffees or making a large grind adjustment, check whether a small purge improves consistency.
Turin DC63 specifications
| Grinder format | Single-dose conical-burr coffee grinder |
|---|---|
| Burrs | 63mm Red Titanium-coated conical burrs |
| Grind adjustment | Stepless, fine through coarse |
| Brew range | Espresso, filter brewing, and Turkish coffee, subject to calibration and recipe |
| Hopper capacity | Approximately 40g with bellows installed |
| Motor | 190W brushed DC motor |
| Static control | Anti-static ionizer in the exit chute |
| Chute | Detachable magnetic chute with knocker |
| Operation | Automatic stop with a short chamber-clearing run-on |
| Body | Anodized 6063 aluminum alloy |
| Dimensions | Approximately 6.5 inches deep × 4 inches wide × 12.6 inches high (16.5 × 10 × 32 cm) |
| Weight | Approximately 11.7 lb (5.3 kg) |
| Color | Black |
| Listed warranty term | One year; confirm applicable coverage and service terms before ordering |
Allow additional room above the grinder for loading beans and using the bellows, plus access to the chute for cleaning. Confirm the electrical rating and plug configuration before ordering; the motor's DC designation does not identify the required wall-outlet voltage.
A straightforward daily workflow
- Weigh the beans for your recipe and choose an appropriate grind setting.
- Add the beans and start the grinder following the manual's operating instructions.
- Allow the automatic stop cycle to finish.
- Use the chute knocker to release remaining fines, and gently use the bellows if your routine calls for it.
- Weigh the grounds while dialing in, then transfer them to your portafilter or brewer.
- Keep the dose, preparation, and clearing routine consistent while making small grind changes.
For a morning espresso followed by an afternoon filter brew, I would note both dial positions rather than try to remember them. That gives you a useful starting point when switching back, although a different coffee or an aging bag may still need a small adjustment.
Conical burrs or a flat-burr grinder?
I would choose the DC63 for its conical-burr approach, narrow body, and measured-dose routine. If your priority is exploring different flat-burr geometries, compare it with a flat-burr platform instead. The DC63 uses a 63mm conical system, not the standard 64mm flat-burr format, so those burr sets are not interchangeable.
The Red Titanium name describes the burr coating, not a promised flavor. The coating is intended to improve surface durability and reduce friction and grounds adhesion; the burr geometry and your brewing choices still do the important work in the cup.
Cleaning and care
Unplug the grinder before removing the magnetic chute or cleaning accessible areas. Use a dry brush to clear accumulated grounds and follow the manual for deeper cleaning and maintenance. Keep water out of the burr chamber, motor, and ionizer.
I would start with dry beans and let the anti-static system do its job rather than make added water part of the routine. If static increases, inspect and clean the accessible chute area according to the manual before changing your process.
For me, the DC63 is most compelling as an espresso-first grinder that can also handle filter coffee. Its combination of stepless control, automatic stop, and accessible chute makes sense when you want to pay attention to the coffee without making every dose an elaborate project.
Turin DC63 user manual
Download the Turin DC63 user manual (PDF) for operating and maintenance instructions.
Details
This product is crafted with quality materials to ensure durability and performance. Designed with your convenience in mind, it seamlessly fits into your everyday life.
Shipping & Returns
Shipping: $5.99 on orders under $35, free on orders of $35 or more (US). Items that ship direct from a supplier use that supplier's rate, shown at checkout. Orders leave within 1–3 business days, and the delivery estimate for this item is shown above.
Returns: You have 30 days from delivery to return unused items. If something arrives damaged, wrong or defective, contact us within 30 days and we'll replace or refund it, with no return shipping needed. Please tell us as soon as you notice, and keep a photo of the item and the box. Opened coffee can't be returned.