Pickup currently not available
Turin DF64 Gen 2.7 Single-Dose Grinder | 64mm Flat Burr
✅ 30-Day Satisfaction Guarantee — Arrived damaged, wrong, or defective? We'll replace it or refund you, no hassle.
One grinder for espresso, filter coffee, and room to experiment
The Turin DF64 Gen 2.7 is an electric single-dose coffee grinder with 64mm flat burrs, stepless grind adjustment, and a plasma anti-static system. It's designed for home coffee drinkers who want control over espresso and the range to brew pour-over, drip, AeroPress, French press, and cold brew. This listing is the 110–120V US model.
What I like about the DF64 is that it gives you a straightforward daily routine without locking you into one style of coffee. Weigh your beans, grind your dose, and brew. You can fine-tune espresso without fixed clicks getting in the way, then move to a coarser setting for a filter brew. Its compatible 64mm burr platform also leaves room to explore a different cup profile later, rather than replacing the whole grinder.
What matters in daily use
- 64mm flat burrs: Choose the burr geometry for the coffee you actually make, whether that's espresso, filter coffee, or a mix of both.
- Stepless adjustment: Make small changes between the marked settings. That matters when a shot needs a little more or less resistance, not a full jump to the next click.
- Single-dose design: Weigh the beans for each drink instead of storing a large supply in a hopper. The grinder does not weigh beans or dispense a programmed dose, so plan on using a coffee scale.
- Plasma static control: The system in the exit chute helps reduce grounds clinging to surfaces and scattering around your coffee station.
- Bellows-assisted grounds clearing: Help move remaining grounds through the chute after grinding. This is a low-retention design, not a promise of zero retained coffee.
- Gen 2.7 convex anti-popcorn blocker: The updated shape helps beans feed into the grinding chamber rather than sitting on top of the earlier flat blocker.
- Metal construction and fixed-speed motor: A substantial body and 250W AC motor keep the focus on grinding rather than menus or programmable controls.
Which burr option should you choose?
I'd start with your primary brew method, not the coating or the most expensive option. Different burr geometries can change body, texture, and how distinctly flavors appear in the cup. Your beans and recipe still matter just as much to the result.
- Turin Stainless Steel: The general-purpose starting point for espresso and mixed brewing. I'd choose this for a first DF64 when versatility is the priority.
- Red Titanium: A coated option with similar general-purpose geometry for espresso and filter coffee. Red Titanium is not the same product as SSP Red Speed.
- Stainless Steel Brew: The separately labeled, filter-focused option. Choose it when filter coffee is your main use rather than assuming every stainless-steel configuration has the same purpose.
The DF64 platform also accepts compatible aftermarket 64mm burrs. SSP High Uniformity is espresso-focused, Multipurpose emphasizes clarity and flavor separation, and Cast Lab Sweet aims for a balance of sweetness, body, and clarity. Check compatibility with the exact burr set before planning a change, and expect to dial in again afterward.
A simple single-dose routine
- Weigh the beans for your recipe.
- Set your grind size following the manufacturer's setup and adjustment instructions.
- Start the grinder, then add the beans. A running start is particularly helpful with dense light-roast coffee at fine espresso settings.
- Let grinding finish, use the bellows as directed to help clear remaining grounds, then stop the grinder.
- Transfer the grounds from the dosing cup into your basket or brewer.
Keep your feeding and bellows routine consistent while dialing in. If you're changing dose, grind, and grounds-clearing technique at the same time, it's harder to tell what improved the coffee.
Switching between espresso and pour-over
The stepless adjustment gives you the range for both, but a saved setting is a starting point, not a guarantee. Note your coffee, dose, brew method, and dial position. Expect a little fine-tuning when you return to espresso, especially as beans age or when you open a different coffee.
For espresso, keep dose and target yield steady while making small grind changes. If the shot runs too quickly, try finer; if it barely flows, try coarser and check your basket fill and puck preparation. Judge the result by taste as well as shot time. Never force the adjustment or tighten the burrs into contact.
Will it work with your espresso machine?
The DF64 can grind espresso for machines with different basket sizes. Basket diameter mainly changes how you transfer the grounds, not whether the grinder can prepare them. With a smaller basket, such as a 54mm Breville basket, use the dosing cup and transfer with a funnel that fits your basket. The cup does not have to fit directly over the portafilter.
Direct grinding into a portafilter depends on its shape, support, and clearance beneath the chute. If it doesn't sit securely, use the dosing cup.
Turin DF64 Gen 2.7 specifications
| Grinder type | Electric single-dose espresso and coffee grinder |
|---|---|
| Burr platform | 64mm flat burrs |
| Selectable burr options | Turin Stainless Steel, Red Titanium, or Stainless Steel Brew, where available |
| Adjustment | Stepless |
| Motor | 250W AC motor; fixed speed |
| Voltage | 110–120V US model |
| Static control | Plasma generator |
| Anti-popcorn device | Gen 2.7 convex blocker |
| Bellows capacity | Approximately 50g |
| Automatic shutoff | 45 seconds |
| Dimensions | Approximately 10 inches deep × 5.2 inches wide × 12 inches high |
| Weight | Approximately 15 lb |
| Colors | Black, white, red, blue, silver, and gray; availability varies by configuration |
Static, cleaning, and everyday expectations
Plasma static control helps keep the routine cleaner, but coffee, humidity, grind setting, and chute cleanliness all affect the result. Retention can also change with burr choice and bellows technique. If mess or retained grounds increase, check for buildup rather than assuming the grinder needs a new setting.
Unplug the grinder before cleaning. Remove dry coffee residue with a brush or grinder-safe vacuum, and keep water out of the grinding chamber, motor, and electrical components. Check the chute periodically and follow the manufacturer's instructions for cleaning the plasma probes and opening the burr chamber. Oily beans and heavier use may mean cleaning more often.
You can start brewing with new burrs without throwing away a large amount of coffee for seasoning. Settings may settle with normal use. If results remain inconsistent despite careful dosing and puck preparation, investigate setup and cleanliness before considering burr alignment.
Is the DF64 Gen 2.7 right for you?
I'd choose the DF64 for a home setup where espresso control, mixed brewing, and future burr choices matter more than programmable dosing or adjustable motor speed. It runs at a fixed speed, unlike the separately named DF64V, and its AC motor is noticeable rather than silent.
If you enjoy weighing your coffee and making deliberate adjustments, that's the appeal: a capable 64mm platform you can learn on, use every day, and adapt as your coffee preferences develop.
Details
This product is crafted with quality materials to ensure durability and performance. Designed with your convenience in mind, it seamlessly fits into your everyday life.
Shipping & Returns
Shipping: $5.99 on orders under $35, free on orders of $35 or more (US). Items that ship direct from a supplier use that supplier's rate, shown at checkout. Orders leave within 1–3 business days, and the delivery estimate for this item is shown above.
Returns: You have 30 days from delivery to return unused items. If something arrives damaged, wrong or defective, contact us within 30 days and we'll replace or refund it, with no return shipping needed. Please tell us as soon as you notice, and keep a photo of the item and the box. Opened coffee can't be returned.